Skip to main content

Change the resolver on your name in ENS Explorer

Change the resolver that answers for your ENS name in ENS Explorer: deploy a new one, reuse one you have, or paste a custom one.

Most names never need this. In ENS Explorer you can change which resolver answers for your name. The usual reason: so a wallet you let edit one name's records can't reach your other names. See Why do all my names share one resolver?

You need a connected wallet that holds the name's Set Resolver role, and a little ETH for network fees (gas). For a name still on ENSv1, see the last question.


Change the resolver

  1. Open the name in ENS Explorer and select Resolver.

  2. Select Change resolver. If you can't see it, see Why can't I see Change resolver?

  3. Choose one of the three options below. If in doubt, turn on Deploy new permissioned resolver.

  4. Select Save changes. If it's greyed out, pick a resolver, turn on Deploy new permissioned resolver, or enter an address.

  5. Approve in your wallet. If you deploy a new resolver, your wallet asks first to deploy it, then to point your name at it.

  6. When the transactions confirm, Resolver shows the resolver's details. Your name now reads that resolver's records.

  7. If the resolver is empty, set your records again in Records.

The three options

  • Deploy new permissioned resolver: the safe default. Turn this switch on and leave Use custom resolver off. ENS Explorer makes a new copy of the ENS permissioned resolver, whose code has been independently checked, and points this name at it. It starts with no records, so you set them again after. Your wallet starts as its only role holder. Its roles let you give another wallet some records to edit, without handing over the name.

  • Existing permissioned resolver: where the page opens, with both switches off. Pick from the list of permissioned resolvers you hold roles on. If it says No deployed resolvers found, turn on Deploy new permissioned resolver instead.

  • Use custom resolver: turn this switch on and paste the address into Contract address. Only use an address you know and trust.

Important: Explorer does not check that a custom address is a real resolver. Paste the wrong thing and your name stops resolving, with no error to warn you. Check the address before you save.

Check a custom resolver first

A working custom resolver can still miss some kinds of record. Those stop working when you switch, with no warning; the rest keep working. Before you switch, open that resolver's own page in ENS Explorer (its address links there) and read its Interfaces list: the record types it supports. If a type you need isn't on it, don't switch to that resolver.


Common questions

Why can't I see Change resolver?

The connected wallet doesn't hold the name's Set Resolver role. Or the name has no resolver at all, which can happen if its resolver was removed: then ENS Explorer shows Set resolver instead, for a wallet that may set one.

How long does it take?

It depends on how busy the network is. The Transaction Manager shows each transaction's progress: see How does the Transaction Manager work in ENS Explorer?

Can I undo a resolver change?

Yes. Open Change resolver again and set it back. Your records are still on the old resolver, so switching back brings them back, unless someone with a role on it changed them meanwhile. Check your records after any change.

Will names I register later use the new resolver?

No. Names you register in the ENS App still use the resolver set up with your first name. Change each one here if you want it elsewhere.

Why did my name stop resolving after the change?

Either the address you pasted isn't a working resolver, or the resolver has no records yet. Open Records and check. If the records are there and it still doesn't resolve, open Change resolver again and deploy a new permissioned resolver, or paste an address you trust. See Troubleshoot transactions in the ENS apps

Where is Use latest resolver?

ENS Explorer doesn't offer that button. For a name on ENSv1, the latest resolver you can add is the ENS public resolver at 0xF29100983E058B709F3D539b0c765937B804AC15. Changing the resolver leaves your records on the old one, so add them again after.

My name is still on ENSv1. What can I change?

ENS Explorer offers only the Contract address box: paste the resolver's address there. The wallet that can change it is the name's Manager (the owner, for a wrapped name), not a Set Resolver role. Deploying a permissioned resolver needs a name upgraded to ENSv2: see Upgrade your name to ENSv2.

Did this answer your question?